M10 JEWEL Machine - Electronic Engraving Machine
. 14
First Contacts
Electrical connections of the machine
Position yourself behind the machine.
1. Plug power supply cord of the external power supply (F) of the machine into the External power
supply connection of the M10 JEWEL machine.
2. Plug power supply cord (E) into the external power supply (F) of the machine and then into
the mains socket.
To cut off the mains supply to your machine in the case of severe problems, unplug the mains
cable
or switch off the machine with the main stop button
at the side of the machine.
Make sure that you can reach them easily.
