GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
5
Wings - tailplane and rudder
Do not begin the assembly until you have familiarised yourself with the components
and the individual construction stages. If you are not satisfied with any component,
report it to your retailer before you start the construction process.
Using sandpaper or sanding block, sand the control horns on the surfaces to be
glued in order to achieve an adequate connection when gluing.
As seen in the photos, unstick the slots in the ailerons, landing flaps, rudder, and
elevators for the GRP control horns; put a dab of glue into the slot, and push the
control horn in until it stops.
Wipe off any excess glue.
