GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
10
The tailplane is installed to the fuselage from underneath using three Allen screws.
The screws are screwed in only tight enough to pull the tailplane and vertical
stabiliser firmly against the fuselage.
Attach the pull cables to the control horn of the rudder as shown in the photo.
Then attach the rudder servo to the servo plate at the front of the fuselage.
As shown in the photo, install the pull cables to the servo lever and adjust them so
that the rudder is in the centre position when the servo is in the centre position.
