GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
14
The attachment block is fastened with two screws.
The installation of the OS MAX GT 33 is described here, but the process
is the same for other motors.
To install the internal combustion engine, the fuselage is placed on the
undercarriage. Using the Allen screws and aluminium bushing provided, attach the
internal combustion engine to the bulkhead.
Attach the servo lever of the throttle servo to the linkage connector. Make sure that it
can turn without any noticeable play. Servo lever about 13 mm.
Fasten the servo to the board using the screws included with the servo.
The throttle linkage is attached to the carburettor lever using the double-cranked
section. With half open carburettor and servo in the middle position, the pushrod is
fixed to the linkage connector using the grub screw.
