GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
11
Screw the aero-tow mechanism into the hole just behind the canopy, and apply UHU
thread-lock fluid to prevent the coupling and nut from working loose.
The aluminium part must be shortened enough so that the clevis can move freely;
adjust the rods accordingly. It is best to operate the aero-tow release mechanism
using a momentary switch mounted on the joystick. The servo travel must be set
accordingly.
Fix the nose gear in the brackets by tightening the screw in the collet. Assemble the
pull cables as shown in the photo. As for the rudder, make sure that when the servo
is in the middle position, the nose gear is also in neutral position, meaning that the
model will later roll straight ahead.
Now the nose wheel is installed along with the cover. To do so, unscrew the fork and
re-install it together with the cover. To install the wheel, a hole of about Ø 9mm must
be drilled/filed into the left side of the cover about 5 mm from the underside.
