GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
17
The distance between bulkhead and spinner base plate should be the same as for
the internal combustion engine. Accordingly, four pieces of equal length must be cut
from the aluminium pipe.
As shown in the photo, the motor then rests upon four stilts. The four hexagonal bolts
must be cut off flush with the nuts.
Depending on the electric motor used, mark the fastening points on the motor
bulkhead and attach the electric motor.
The speed controller for the electric motor is fastened to the bulkhead as shown in
the photo.
Cockpit canopy
Glue the seat backs and pilot figure in the proper positions as shown in the following
photo.
The parts should be affixed using double-sided tape, such as Order No. 2904.
The cockpit canopy is attached using transparent tape all around.
The final work on the model consists of fitting and gluing the navigation lights and
decals. To position the individual name placards correctly, refer to the illustrations on
the carton.
