GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
3
Tips on building the model
•
Before assembling the model, it is essential to read the construction diagram and
the instructions all the way through. When using tools, be aware of the possible
dangers.
•
Use only suitable cables that are adequate for the electrical currents that occur
during operation.
•
Set up the receiver aerial as far as possible away from the cables carrying the
operating current (at least 3 cm).
•
Clean residual grease from all connections that are to be glued. This can, for
example, be done through sanding and using a non-relubricating cleaning
solution. The same goes for the surfaces to be painted, in order to make sure that
the paint sticks. Before gluing parts, always roughen the corresponding surfaces
(especially for GRP fuselages) carefully with fine sandpaper and de-grease them
thoroughly, for example with acetone. Otherwise, adequate adhesion is not
assured.
Other required accessories
Internal combustion motor and accessories
Recommendations for internal combustion motor
Motor
Order No.
Capacity
cm³
Propeller
Order No.
Petrol motor
GT 33
2772
33
45x25 cm
1314.18x10"
Recommendations for electric motor
Electric
motor
Order No.
Propeller
Order No.
Drive battery
Order No.
Speed
controller
Order No.
COMPACT
740 Z
7780
45 x 25 cm
1326.22x10
LiPo 3/5200
18.5/5.2Ah
9752.5
COMPACT
CONTROL
90S
7228
Radio control system
It must have at least 5 control functions and 9 servos. Furthermore, the
transmitter must be capable of servo rotation reversal.
Particularly recommended: Computer-System from MX-20 to MC-24. Servos with
standard dimensions can be installed.
As receiver battery, we recommend: Receiver battery LiFe 2/2900 6.6V JR Order No.
7672.2, which has to be carefully serviced before and after all flight operations. The
