124
Zodiak Installation and Service Manual
Section 3 — Configuration
under User # in the Tally Calculations pane, as shown under User 3 in this
example. Calculations for On Air Tally can not be shut off. When the calcu-
lation method is on, the (Off) annunciator disappears.
There are four Tributaries available for each tally calculator. There are plus
(+) signs between each of the Tributaries to indicate they all sum (or logi-
cally OR) together to form a union of sources. Each tributary has a data box
showing the output through which the tributary is traced upstream to its
source. If a tributary has not been defined or has been cleared the data box
displays ---.
The Tributaries for a given Tally Calculator must all terminate in the same
M/E or Aux system.
The Tributary data boxes, when touched, pop up a picker menu as shown
in
Figure 84. Tally Out Popup Menu
The title to the popup pane shows the calculator identifier and the Tribu-
tary number. For reference, the Calculation Name, Calculation Method,
and Level are shown in non-editable data boxes.
The starting point for the tally calculation is selected in the picker pane,
titled Output, when the switcher outputs are listed. This illustration shows
two outputs on Zodiak for an M/E.
