GRASS VALLEY LDX 150 User Manual Download Page 37

Page: 37 / 185

LDX 150

User Guide

• <AES> BNC connector is used as a Digital Audio AES input (this audio source can be

selected in the audio section of the camera)

• <TriLvl> HD Tri-Level reference output, can be used as a locking source for a second

camera.

• <Composite> Composite (SD Black Burst) reference output, can be used as a

locking source for a second camera.

✎

Tip

Locking diagnostics can be monitored in the

Diagnostics > Reference

menu.

XCU

(only valid when camera is in XCU mode)
The locking source is directly connected to the Reference Input BNC connector on the XCU

backpanel: it can be either a HD Tri-Level sync or Composite (SD Black Burst) signal.
In the XCU menu, go to the

Install > Reference Source > Source

function and select

RefVideoIn

. The XCU accepts and detects both HD Tri-Level and SD Black Burst reference

signals.

Free running

The camera is not locked. Go to the

Configuration > Reference

function and select

FreeRun.

Summary of Contents for LDX 150


























































































































































































Search results

Summary of Contents for LDX 150

Reviews:

Brands by name

Popular brands

GRASS VALLEY LDX 150, User Manual

Search results

Summary of Contents for LDX 150

Reviews:

Brands by name

Popular brands