GRASS VALLEY LDX 150, User Manual

Page: 114 / 185

96
Menu references
Operator Toolbox menu
Peaking (Return) 0..99
(0)
0 O Peaking level applied to the Return video signal in the
viewfinder (when enabled)
Fine Lvl
-20..50
(0) 0 O Fine Peaking level
Color White , Red, Green, Blue,
Yellow, Magenta, Cyan,
Purple
0 O Viewfinder Peaking color
VF Detail
VF Detail Off, On , Boost 0 O Enable/disable VF Detail, or adds extra Detail to the
viewfinder signal (Boost)
Super Coarse Off , On 0 O Enable/disable Super Coarse VF Detail
Detail Level 0..99 (50) 0 O Detail level for viewfinder signal
Slicer 0..99 (10) 0 O Noise Slicer level for VF Detail
Vert Detail Lvl 0..99 (50) 3 O Vertical component of VF Detail level
Coarse/Fine 0..99 (90) 3 O Detail balance between coarse and fine structures (0 =
coarse, 99 = fine)
Level Dep 0..99 (30) 3 O Level at which VF Detail starts to work
Soft Detail Off, On 3 O Enable/disable Soft Detail: this reduces the amount of
detail added for large transitions
Soft Detail Lvl 0..99 (50) 3 O Upper limit level for Soft Detail
VF Mode Combined , 1 Phase,
2 Phases, 3 Phases
2 - (only for high speed video modes)
Method of combining high speed phases for the
viewfinder output:
Combined: all phases are combined to obtain the
highest signal level for live viewing. Some blurring may
occur when panning or tilting.
1 Phase: only 1 phase is used to obtain highest
sharpness but lower video levels.
2 Phases: same as above but with 2 phases.
3 Phases: same as above but with 3 phases.
Note: try the setting that suits your situation best.
Menu Settings
Rotary Speed 1..10
(5)
2 O Reaction speed of the front rotary button
Menu Display On,
Time
2 O Camera menu alwasy on or or disappear after a set time
Menu Time 3..30
(10)
2 O Time (in seconds) the menu is shown when Menu
Display is set to Time.
Menu White Lvl 0..99
(70)
2 O White level (brightness) of the characters of the menu
Info Settings
Info Start Page
1
,2,3,4 2 - First page shown when info button is initially pressed
Info Display On,
Off
2 - Time (in seconds) the info page is shown when Info
Display is Off.
Info Time 3..30
(10)
2 - Sets the time (in seconds) the info page is shown.
Function: Values: U: F: Description: