GRASS VALLEY Kayak HD 100C, User Manual

Page: 496 / 558

496 Kayak — User Manual
Section 7 — Sidepanel Menu Summaries
Figure 403. Sidepanel – Modify Programmable Functions
At least one function other than None, 2
nd
or 3
rd
must be programmed. Oth-
erwise the AUX-CP performs no action at all.
Since the CP-3020 AUX control panel module has only two delegation but-
tons, Deleg 1 and Deleg 2 may be programmed with 2
nd
and 3
rd
. In this case,
Deleg 3
defines the function of the AUX-CP.
Deleg 4..6
can be ignored.
Button Assign:
When the AUX Control Panel is used for crosspoint selection of internal
buses, the sources can be assigned freely to the source selection buttons of
the AUX-CP. To do this, Assign changes the contents of the index card. (See
Figure 404 .)
None
No function
2
This button is used as 2
nd
button i.e. shifts the source
selection buttons
3
This button is used as 3
rd
button i.e. shifts the source
selection buttons.
AUX
M/E Bus
P/P Bus
These buttons delegate the AUX-CP to the crosspoint
selection for the given bus.
Ext. AUX
These buttons delegate the AUX-CP to crosspoint selec-
tion for the given external AUX bus.
RAM Recorder
These buttons delegate the AUX-CP to crosspoint selec-
tion for the RAM Recorder channels.
TiM/E Memo n:
This button delegates the AUX-CP to register recall for
the given TiM/E Memo system.