GRASS VALLEY Kayak HD 100C User Manual Download Page 264

Page: 264 / 558

264

Kayak — User Manual

Section 5 — Kayak Menu Summaries

Point

—

simulates a spotlight type of lighting effect that radiates light evenly

in all directions.

Bar

—

simulates lighting from a bar-shaped long, thin lighting source.

Plane

—

simulates a parallel light striking the entire surface of the video.

Position

Used with

Point

and

Bar

light sources to control the position of the point

light, or the position of some point along the bar light, with respect to the

X, Y and Z axes in 3D space.

Rotation

Used with

Bar

and

Plane

light sources to control the direction of the bar light,

or the direction that the plane light faces along the X, Y and Z axes. Setting

Rotation to 0 places the Plane light directly behind the viewer’s head.

Appearance

Light Intensity

—

Changes the incident value of the light (which may appear

as a change to the reflectivity of the surface).

Light Softness

—

Control of softness of the edge of the light. 100% creates

maximum softness, 0% gives a hard edge. At extremely small values some

aliasing artifacts may appear.

Surface Gloss

—

Provides soft knob control of how much light is scattered as

it is reflected off the surface of the picture. At 100% the lighting acts like it

is reflecting off of a mirror. At 0% the light acts like it is reflecting off of a

frosted piece of glass.

Flare

When light reflects off a surface two lighting components result, the

primary reflected light and a glare (flared halo) of scattered light. The Flare

controls provide soft knobs to adjust this lighting component.

Flare Intensity

— Controls the amount of the flare light scattered off the sur-

face.

Flare Ratio

— Controls the ratio between the primary light and the flare light.

100% is all primary light, 0% all flare light.

Independent Flare Intensity

This button allows independent control of the primary and flare compo-

nents of the light. When Off, changing the value of one control will alter the

appearance of the other component of the light. The actual values reported

Summary of Contents for Kayak HD 100C















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Kayak HD 100C

Reviews:

Brands by name

Popular brands

GRASS VALLEY Kayak HD 100C, User Manual

Search results

Summary of Contents for Kayak HD 100C

Reviews:

Brands by name

Popular brands