GRASS VALLEY Kayak HD 100C, User Manual

Page: 187 / 558

Kayak — User Manual 187
Config Menus
Field Dominance
The button can be used to switch over between
Any Field, Field1
and
Field2
.
The setting concerns the switching of the crosspoints on all buses, the start
of auto transitions, switching with Cut and the recalling of snapshots and
timelines. In position
Any Field
switching occurs at the beginning of the next
frame. In position
Field 1/2
switching or starting occurs before the corre-
sponding field.
Key Memory - Auto Save On/Off
If the
Key Memory
button is switched on in a Keyers menu, the key memory
is always recalled if the key sources are changed during control panel oper-
ation. These changes can occur directly by selecting another key source or
also indirectly by changing the Fill source or the Split mode.
For storing the key settings in the key memory two modes are available:
Format (SD switcher only)
Select TV size standard 4:3 or 16:9.
Auto Save:
If the button AutoSave is activated (On), the settings of the
previous key signal are stored automatically before the
settings of the next key are recalled.
If the button AutoSave is deactivated (Off), the stored set-
tings of the new key are recalled without saving the pre-
vious settings.
Manual Storing:
The Key Memory button AutoSave is deactivated (Off). For
storing the current settings into the key memory, press
the button of the respective Fill source approximately
two seconds. The storing is confirmed by a short beep in
the control panel.