GRASS VALLEY Kayak HD 100C, User Manual

Page: 493 / 558

Kayak — User Manual 493
Configuration Menus
GPI Functions:
Note In the Command mode, user-defined commands are selected being trans-
mitted to the switcher at a received trigger event. S electing Command
enables you to directly enter the command code. S ee for this purpose the
DD35
command set, which can be obtained from the manufacturer. The
other selections are defined in text files
GPICMDMF.TXT
(mainframe) and
GPICMDCP.TXT
(panel). These files are contained in the directory
c:/
programme/dd35/bin
.
Note For entry, a special syntax has to be considered. It is possible to add pre-
defined parameters to the command, the available commands are listed in
these files. For editing, it is best to copy and match existing entries. In any
case, the
DD35/XtenDD
command set is required.
None:
GPI has no function.
Command:
User-defined command code. See note below.
Misc:
Switch over the Video Standard or Video Format
Video Format (4x3, 16x9)
Inactive = 4x3
Active = 16x9
Video Standard (625/50, 525/60)
Inactive = 625/50
Active = 525/60
This is a very redundant function because the switcher
can auto detect the video standard from the signal at the
reference input.
Autotransition:
Starting Auto Transition, selected in the pop-up list
Recall Snapshot:
Starting Snapshot, selected in the pop-up list
M/E1:
Starting function, selected in the pop-up list
M/E2:
Starting function, selected in the pop-up list
M/E3:
Starting function, selected in the pop-up list
PP:
Starting function, selected in the pop-up list
Stores:
Starting Video Store or MPR Store, selected in the pop-up
list