GRASS VALLEY Kayak HD 100C User Manual Download Page 425

Page: 425 / 558

Kayak — User Manual

425

DVE Menus

To select an effect, first preselect it (dark blue border) then press

double-click an effect directly. The selected effect (light blue background)

can be controlled by the motion control buttons or by the DPM digipot on

the right side.

The effect selection can be learned in a macro. Since you can run up to four

DPM effects simultaneously, learning motion control commands in macros

has to be done carefully.

Pressing the

Play

button while learning a macro, this macro will record a

play command for the first channel in the selected effect.

Example:

If the effect contains channel 2, 3, 4 – the macro will record the play

command for channel 2. This macro can be used to play any effect con-

taining at least channel 2, because a play command for one of the used

channels will play all used channels. So 4 macros is enough to play all

effects.

Current Effect Number

In this section you find an indication of the selected effect per channel. This

can differ from the last recalled effect, since an effect recall only loads the

channels included in the DPM effect.

Dialog Buttons

DVE Extern

Menu serves to control an external DVE system.

DPM Edit Menu

Edit menu page to create new effects or edit existing ones.

Function Buttons

Delegate

Delegating the menu to an M/E or P/P stage of the switcher.

Summary of Contents for Kayak HD 100C















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Kayak HD 100C

Reviews:

Brands by name

Popular brands

GRASS VALLEY Kayak HD 100C, User Manual

Search results

Summary of Contents for Kayak HD 100C

Reviews:

Brands by name

Popular brands