GRASS VALLEY Kayak HD 100C, User Manual

Page: 115 / 558

Kayak — User Manual 115
Effects Subpanel
DPM (Digital Picture Manipulator)
In DPM Mode the Effects Subpanel serves for recalling and editing DPM
effects. For general information on the DPM structure in the Kayak system
please refer to DPM Menus on page 228
Recalling a Register
Effects can be recalled in two different modes: Register Mode and Bank
Mode
REGISTER MODE is an input mode for the register number in the Effects
subpanel, in which the number is entered in one digit (0 ... 9) or in two
digits (10 ... 99) followed by the Cut button. Do not use the Enter button for
confirmation.
BANK MODE is an input mode for the register number in the Effects sub-
panel. The bank number 0 ... 9 corresponds to the tens digit of the register
number. When the units digit of the register number is entered, the corre-
sponding effect is recalled immediately.
To run an effect in either mode, just press the
Cut
button.
Note In register mode the first press of the Cut button (after you have entered the
digits) recalls the effect. The next press of the Cut button runs the effect.
While the effect is running, consecutive pressing of the Cut button toggle
between Pause and Play.
For more detailed run controls please use the menu.
Enabling and Disabling Bank Mode
The Bank mode in the DPM panel permits access to a stored effect with a
single key (hotkey). The bank number is the tens digit of the register. The
hotkeys are the units digits of the register. The Bank mode may be enabled
during storing but this does not have any particular benefit.
Enabling Bank Mode
Hold the
Bank
button down and select the desired bank with the numeric
keypad. The Bank button lights up. In the display a ” B ” appears before the
register number. While you are in Bank mode you can change the current
bank in the same way.
Disabling Bank Mode
Press the lighting Bank button.
Example:
EFF 05 eff05 ----