GRASS VALLEY Kayak HD 100C User Manual Download Page 347

Page: 347 / 558

Kayak — User Manual

347

Section

Sidepanel Menu Summaries

Introduction

The Sidepanel program is a PC-based program, which is used as the menu

part of the Grass Valley DD35/XtenDD switcher control system.

Since the Kayak HD is also a member of this control system, the Sidepanel

program can be used to enhance the possibilities of the Kayak HD switcher.

More advanced features, which you normally do not find on a switcher of

this size will become available by the use of this program also for the

smaller types of the Kayak Series.

The Sidepanel can also be used to control Kayak HD mainframes by

XtenDD Control Panels like RPS 35-4/32.

The program runs on the Windows operating system requiring at least

Windows 95 or later.

Note

ince the

idepanel program is also used for the XtenDD series, this manual

shows additional items which are not available for the Kayak HD system.

Note

In some menus of the

idepanel you may find features which are not yet

implemented in the Kayak HD system or will not be available at all, due to a

different hardware structure

Due to their logic structuring and application of standard elements, the

menus are largely self-explaining. The setup is made according to the

Graphical User Interfaces (GUI) usual in the PC world. Control of the indi-

vidual functions is possible with the associated softkeys as well as with a

mouse.

The following sections serve as an introduction into the philosophy of

menu control, describing only the most important elements. Detailed infor-

mation concerning the individual menus is contained in the following

chapters of the manual.

Summary of Contents for Kayak HD 100C















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Kayak HD 100C

Reviews:

Related manuals for Kayak HD 100C

Brands by name

Popular brands

GRASS VALLEY Kayak HD 100C, User Manual

Search results

Summary of Contents for Kayak HD 100C

Reviews:

Related manuals for Kayak HD 100C

Brands by name

Popular brands