manualshive.com logo in svg

GRASS VALLEY KARRERA, User Manual, Page: 251 / 370

Share
Download
GRASS VALLEY KARRERA User Manual Download Page 251

KARRERA  —  User Manual

251

Additive Keyers

 

From the Menu

Additive Key

 and 

Super Add

 buttons are provided in the menu for Fixed and 

Adjusted Linear and Luma keys so you can override the video shape 
selected in the Source Definition menu (changes from Auto to On or Off) 
for that source.

In the menu, the 

Additive Key

 button is located in the Keyer, Mode menu 

(

Figure 131

).

Figure 131.  Keyer, Mode Menu—Additive Key

Note

Selecting or re-selecting any Keyer Mode button (

Fixed Linear

, 

Adj Linear,

 

or 

Luma Key

) will reset the shape type to “Auto”, i.e. as defined in the Source 

Definition menu.

1.

Touch the desired Key.

2.

In the Keyer Mode pane, touch the 

Fixed Linear

, 

Adj Linear

, or 

Luma Key 

buttons if not already selected.

3.

Touch the 

Additive Key

 button to turn it to On (illuminates green).

4.

Touch the 

Additive Key

 button again to turn it Off.

The key will remain in the selected On/Off state.

Summary of Contents for KARRERA



















































































































































































































































































































































































Reviews:

No comments