Related Links
About con
fi
guring K2 Summit SAN systems
on page 22
About standalone K2 Summit system and K2 Dyno PA DLC con
fi
guration
on page 34
Ordering the network adapters for K2 Dyno PA
Prerequisites:
•
The K2 7.2.x software must be installed and con
fi
gured as speci
fi
ed in the K2
Summit documentation.
•
The
fi
le system name and storage disk labels on the K2 Summit system need to be
unique. If the system has been upgraded to 7.2.x from an earlier version, the
fi
le
system must be re-created with the Storage Utility tool, as speci
fi
ed in the K2
System Guide.
To enable the Browse feature on K2 Dyno PA, SNFS requires that the
fi
rst network
adapter on the K2 Summit system must be the Control connection; the loopback adapter
cannot be the
fi
rst network adapter.
1. Disable the write
fi
lter.
2. Reboot the machine.
3. If you are going to use the DLC Tool to con
fi
gure the FsNameServers
fi
le, skip to
step 5. Otherwise, navigate to
c:\snfs\config
.
36
K2 Dyno Production Assistant Con
fi
guration Manual version 1.5
15October 2010
Con
fi
guring the standalone K2 Summit system and K2 Dyno PA
Summary of Contents for K2 Dyno PA
Page 60: ......
