GRASS VALLEY K2 Dyno PA, Configuration Manual

Page: 56 / 60

Adding or replacing a K2 Summit system in an existing K2 Dyno
PA system
If using the Browse feature in Dyno PA, and a K2 Summit system needs to be added
or replaced, follow these steps.
1. When adding a new or replacing an existing K2 Summit system in a K2 Dyno PA
system, the FsNameServers fi le in the C:\SNFS\Con fi g folder must be identical to
the other FsNameServers fi les in the system. This fi le contains the IP addresses of
the Control network ports on up to three name servers. You do not need to disable
the Write Filter to edit the FsNameServers
fi le.
• If adding or replacing a K2 Summit system that is not being used as a host name
server, copy the FsNameServers
fi le from one of the other machines in the setup
to the C:\SNFS\Con fi g folder of the new machine.
• If replacing a K2 Summit system that is used as a host name server, the same
IP address for the Control network can be used on the replacement machine.
Since the identical FsNameServers
fi le already exists on the other K2 Summit
systems or Dyno PA machines, copy the existing FsNameServers fi le from one
of these to the replacement machine.
• If adding a new host name server to an existing K2 Dyno PA system, the IP
address of the Control network for the new machine needs to be added to the
FsNameServers
fi le of all the K2 Summit systems and Dyno PA machines in
the current setup. Either add this IP address to all the FsNameservers fi les or
update one FsNameServers fi le and then copy that fi le to the other machines.
You can have up to three host name servers in a setup.
2. Reboot the K2 Summit systems.
3. Reboot the K2 Dyno PA machines.
Related Links
Managing K2 Dyno PA on page 49
Restoring the K2 Summit system to a pre-DLC configuration
If you need to roll a K2 Summit system back to its pre-DLC con fi guration, you can
undo the changes.
Related Links
Managing K2 Dyno PA on page 49
Restoring the network adapter order on page 57
Undoing the DLC server con fi guration on page 57
56 K2 Dyno Production Assistant Con fi guration Manual version 1.5 15October 2010
Managing K2 Dyno PA