GRASS VALLEY K2 Dyno PA Configuration Manual Download

Page: 38 / 60

About the DLC Tool

The DLC tool streamlines the SNFS con

guration on a standalone K2 Summit system

by adding the IP addresses of the Control network ports of the name servers to the
FsNameServers

le. You can download the DLC tool from the download site.

Related Links

Con

guring the DLC server

on page 37

Installing the DLC Configuration Tool

Install the DLC Con

guration Tool on the standalone K2 Summit system. You can

download the DLC Con

guration Tool from the download site.

1. To start the installation, double-click the DLC Con

guration Tool Setup icon on

the Windows desktop

2. Follow the instructions in the installation wizard.

3. On the

nal page of the installation wizard, if you do not want to use the DLC

Con

guration Tool immediately, click

Finish

The installation wizard closes.

4. If you do want to use the DLC Con

guration Tool immediately, check the

Launch

DLC_Tool

box on the last page of the installation wizard, click

Finish

, and proceed

to Con

guring the DLC server with the DLC Tool.

The DLC Con

guration Tool opens.

Once the DLC Con

guration Tool has been installed, the DLC Tool, as well as the

K2 AppCenter log on dialog box, displays.

Related Links

Con

guring the DLC server

on page 37

Configuring the DLC server with the DLC Tool

•

The DLC Tool must be installed on a standalone K2 Summit system.

•

The K2 7.2.x software must be installed and con

gured as speci

ed in the K2

Summit documentation.

•

The

le system name and storage disk labels on the K2 Summit system need to be

unique. For more information, see Creating a unique

le system name and storage

disk labels.

•

The network adapters need to be ordered as described in Ordering the network
adapters for K2 Dyno PA.

•

Before using the DLC Tool, make sure K2 AppCenter is not running on the
standalone K2 Summit system.

•

The Write Filter must be disabled before using the DLC Tool.

K2 Dyno Production Assistant Con

guration Manual version 1.5

15October 2010

Con

guring the standalone K2 Summit system and K2 Dyno PA

Summary of Contents for K2 Dyno PA





























































Search results

Summary of Contents for K2 Dyno PA

Reviews:

Related manuals for K2 Dyno PA

Brands by name

Popular brands

GRASS VALLEY K2 Dyno PA, Configuration Manual

Search results

Summary of Contents for K2 Dyno PA

Reviews:

Related manuals for K2 Dyno PA

Brands by name

Popular brands