GRASS VALLEY Encore, Configuration Manual

Page: 351 / 426

Encore — Configuration Manual 351
Local Machine Control Panel (LMCP)
Rewind, Fast-Forward and Stop, which are equivalent to clicking the
buttons — see
LMPC Shortcut Keys on page 368 .
How to Record Using the Transport Control Buttons
CAUTION The procedure you should follow depends on the device you have installed.
We describe a typical procedure below, but it may not apply to your installa-
tion.
1. From the Devices panel select a device to record to (destination device).
2.
Select which tracks to record with the
Recording Mode Selection
indicator
buttons.
3.
Click the
Lock
indicator button to Lock the device if this is required.
4. Click the
Create
button. The system displays a list of clip types.
5.
Choose a clip type. The system displays the Filer-Fax.
6. Select the categories you require. See Filer-Fax on page 369 for more
information.
7. Save the clip by pressing the
Save
button.
8.
Click the
Preview
indicator button to switch it on (button becomes
green), or off (button becomes grey) as required.
9.
The currently selected device is ready to record. Click the
Record
button
to start recording.
10. The LMCP records into the clip you created using whatever Source is
routed to the destination device.
How the Other Controls Respond
Clicking the
Eject
button ejects what is loaded in the currently selected
device; the button shows white. Any information referring to the clip in the
Clip Area disappears. If the selected device is a VTR, the tape is ejected.
Clicking the
Rewind
button rewinds the clip that is loaded in the currently
selected device; the button shows white. Once rewinding is complete, the
Rewind
button shows grey and the
Pause
button is automatically selected
and shows white.
Clicking the
Play
button plays the clip in the currently selected device — the
button shows white. Once play-out is complete, the
Play
button shows grey
and the
Pause
button is automatically selected and shows white.
Clicking the
Fast Forward
button fast-forwards the clip that is loaded in the
currently selected device; the button shows white. Once fast-forwarding is
complete, the
Fast Forward
button shows grey and the
Pause
button is auto-
matically selected and shows white.