GRASS VALLEY Encore, Configuration Manual

Page: 278 / 426

278 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Panels with Keypads (XY, PMB, etc.)
You can also restrict name keypad searches on these types of panels.
1.
Follow the Panels Without Keypads (48B, BPS, etc.) procedure on
page 276 to configure any Source and Destination buttons on that panel
in only the desired Areas.
2. In the Attributes and Flags menu, disable the
Keypad Local Source
flag in
order to configure the Keypad Searchable Areas attribute.
3. Select the
Keypad Area(s)
field. This will display a menu similar to that
shown in Figure 176 .
Figure 176.
4.
In the System Areas box, select the desired Area (e.g. “StudioA”).
5. Select
Add
to move the selection to the Searchable Areas box.
6.
If there are Areas where the panel should not be able to search, remove
them. This only affects keypad prefix/suffix entered searches for
presetting Sources and Destinations.
Note Using the prev/next button without a keypad entered prefix/suffix will access
all
S ources in all Areas in S ource mode and only Destinations not excluded in
Destination mode.
7. If you would like keypad-entered Source searches to only search the
controlled Destination Areas, re-enable the
Keypad Local Source
flag.
Otherwise keypad-entered prefix/suffix Source names will search the
currently controlled Destination Area(s) and the Areas defined in the
“Keypad Area(s)” attribute.
8.
Close the windows and select
Save
.