GRASS VALLEY Encore, Configuration Manual

Page: 255 / 426

Encore — Configuration Manual 255
Configuring Encore Control Panels
7. Repeat the steps above for all the Categories you wish to include in that
Set (
Figure 158 ).
Figure 158. Additional Source Category Added to Set
8. When done, click on the left red
Save
button to save that Source
Category Set containing the Categories you just defined. When saved
the button will no longer be colored red.
9. This Category Set will be automatically applied to the Control Panel
configuration you are editing. These Categories and Sets are also
globally available for use by other panels in the Encore system.
Sources can be added or removed from individual Categories, using the
Add
and
Remove
buttons. When the
Source List
button is selected, Sources can be
chosen to be added. When the
Category List
button is selected, Sources of
another existing Category can be added to that Category. Category Sets can
also be edited by defining new Categories.
CAUTION S ource Categories and S ource Category S ets are global. Any edits or dele-
tions will affect the operation of all Control Panels currently using those Cat-
egories or
S ets.
The two
Show Used
buttons can be used to identify which Control Panels
and/or RCL Clients are currently using particular Source Category Sets
(left button), and identify which Category Set is using a particular Source
Category (middle button).
The
Sort
button can be used to put the Sources in that Category into alpha-
numeric order.