GRASS VALLEY Encore, Configuration Manual

Page: 324 / 426

324 Encore — Configuration Manual
Section 7 — Tie-Line Manager
Clicking on the
Name
,
Ultimate Source
, or
Local Source
columns opens the Tie-
Line Status pane displaying information about that tie-line ( Figure 195 ).
Figure 195. Tie-Line Status Pane
This same information is displayed on the Tie Config screen ( Figure 191 on
page 316 ), and this pane operate the same. For example, clicking on the
Tie Users
button displays a list of all the users of that tie-line.
The In Use By column shows the top user along with the number of users of
that tie-line. An unavailable or offline Router Matrix is also indicated in this
column. Clicking the
In Use By column of a tie-line in use allows you to
release that tie-line. A warning message appears that you must confirm
before the tie-line will be released (
Figure 196 ).
Figure 196. Release Tie-Line Warning Message .
(Top of Screen) Area Buttons
Displays the names of the current Areas selected. Clicking
on a button opens a list of the Areas for selection. The left
button selects a Source Area, and the right button selects a
Destination Area. Only tie-lines spanning those areas will
be displayed below.
% Usage
Displays the percentage of tie-lines currently in use
between the selected Areas.