GRASS VALLEY Encore, Configuration Manual

Page: 236 / 426

236 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Force Unlock/
Unprotect
Typically this is left OFF because this flag creates a “super
user” control panel. When ON, allows the panel to force
an UnLock/UnProtect on a controllable Destination.
Hard Lock
When ON, allows the panel to Hard Lock a Destination,
preventing any panel (including the one used to set the
Hard Lock) from changing the Source for that Destina-
tion. The panel initiating the Hard Lock must remove the
lock before that Hard Locked Destination’s Source can be
changed. The only exception is a “super user” panel (
Force
Lock/Protect
,
Lock/Protect Override
) can override a Hard Lock.
This flag is mutually exclusive with
Soft Lock
and
Protect
.
Hold Breakaway
When enabled, the panel will retain Level breakaway set-
tings even when new Destinations are selected or the
router configuration changes Destinations configured
levels. Note that if the user presets Levels and selects a
Destination that does not support any of the preset
Levels, the user must manually preset Levels to match the
controllable Levels for the new Destination. The Panel
Server will not change the preset Levels automatically to
match the Destinations controllable Levels when this flag
is enabled and a Level preset change has been effected.
The Hold Breakaway feature is not available on MCO,
COS, CLNT, and SVR panels (the flag is grayed out).
Hold Preset
When ON, a panel holds the preset Source, Destination,
or Salvo for additional Takes after a Take is executed.
When OFF, presets are cleared after each Take.
ID From UI Lock
When ON, prevents the OUI from blinking a control
panel's buttons for device identification. When OFF,
panel ID is permitted.
Keypad Dst Mode
When ON, allows the panel to automatically use the sec-
ondary (alternate) keypad set whenever the control panel
enters Destination mode. This allows users to define sep-
arate keypad sets for Source and Destination mode for
quick access to these name sets.
Keypad Local
Source
When ON, restricts the keypad entered Source names to
only search for a match in the same Area as the panel's
controlled Destination(s). This feature can also be
assigned to a panel button to toggle it on or off directly on
the control panel.