Page 10 of 112
Warning: Service Symbol
WARNING
The
indicates the location of a service adjustment part and is intended for service
personnel only. The GSI 39 is a specifically calibrated audiometer and Tympanometer,
and the periodic service and adjustments for the instrument that may be required should be done
only by an authorized GSI service technician.
Please read the entire manual prior to using the GSI 39 to become familiar with the test functions and
proper accessory connections.
Accessory equipment connected to the analog and digital interfaces must be certified to the
respective IEC standards (IEC950 for data processing or IEC 60601-1 for medical equipment).
Furthermore, all configurations shall comply with the system standard IEC 60601-1-1. Everyone who
connects additional equipment to the signal input or signal output port configures a medical system
and is therefore responsible that the system complies with the requirements of the system standard
IEC60601-1-1. If in doubt, consult the technical service department or a local GSI representative.
Customer Responsibility
WARNING
This product and its components will perform reliably only when operated and
maintained in accordance with the instructions contained in this manual,
accompanying labels, and/or inserts. A defective product should not be used. Parts
which may be broken or missing or are plainly worn, distorted or contaminated should be replaced
immediately with clean, genuine replacement parts manufactured by or available from GSI.
The responsibility of GSI for a malfunction product is limited by the warranty set forth in this manual.
Should repair or replacement of this product become necessary after the warranty period, the
customer should seek advice from GSI Technical Support prior to such repair or replacement. If this
product is in need of repair, it should not be used until all repairs have been made and the unit is
functioning properly and ready for use. The owner of this product has sole responsibility for any
malfunction resulting from improper use or maintenance, or repair by anyone other than GSI, and
from any malfunction caused by parts that are damaged or modified by anyone other than GSI.
This product should not be used in the presence of fluid that can come into contact with any of the
electronic components or wiring. Should the user suspect fluids have contacted the system
components or accessories, the unit should not be used until deemed safe by a GSI certified service
technician.
Do NOT use in the presence of flammable gaseous mixtures. Users should consider the possibility of
explosions or fire when using this device in close proximity to flammable anesthetic gases.
