Page 25 of 112
UNPACKING AND INSPECTION
Examine the outside of the shipping container for any signs of damage. Notify the carrier immediately
if any damage is noted.
Carefully remove the instrument from its shipping container. Remove the plastic bag protecting the
instrument. If the instrument appears to have suffered mechanical damage, notify the carrier
immediately so that a proper claim can be made. Be certain to save all packing material so that the
claim adjuster can inspect it as well. As soon as the carrier has completed the inspection, notify a GSI
Distributor.
Check that all accessories listed in Table 1 (per version ordered) are received in good condition. If any
accessories are missing or damaged, notify a GSI Distributor or the factory immediately.
NOTE:
Keep the original packing material and shipping container so the instrument can be well
packaged if it needs to be returned to the local service center for repair or calibration.
WARNING
ONLY GSI approved parts and accessories should be used with this Instrument. The
use of parts or materials that are not recognized to be used with this device can
degrade minimum safety.
Standard Components - General
•
Probe Assembly (226 Hz Probe or Combo Probe)*
•
Audiometry Headset, DD45 (Version 3 and Version 4)
*
•
Contralateral Insert Phone (Version 2 and Version 3)
*
•
Insert Phone Ear Tips (8 sizes, 4 each) (Version 2 and Version 3)*
•
Probe Eartips (6 sizes, 2 each)*
•
Switching Power Adapter
•
2m USB Cable
•
Test Cavity
•
Operating Instructions (on USB drive)
•
GSI Suite (on USB drive)
•
Wall Chart, 226 Hz
•
4” Thermal
Paper, 3 rolls
*Applied Parts according to IEC 60601-1
