Page 18 of 112
WARRANTY AND REPAIR
We, Grason-Stadler, warrant that this product is free from defects in material and workmanship and,
when properly installed and used, will perform in accordance with applicable specifications. This
warranty is extended to the original purchaser of the instrument by GSI through the distributor from
whom it was purchased and covers defects in material and workmanship for a period of one year
from date of delivery of the instrument to the original purchaser. If within one year after original
shipment, it is found not to meet this standard; it will be repaired, or at our option, replaced at no
charge except for transportation costs, when returned to an authorized Grason-Stadler facility. If
field service is requested, there will be no charge for labor or material; however, there will be a
charge for travel expense at the service center’s current rate.
NOTE:
Opening the instrument case or changes to the product not approved in writing by
Grason-Stadler shall void this warranty. Grason-Stadler shall not be responsible for any indirect,
special or consequential damages, even if notice has been given in advance of the possibility of
such damages. The transducers may go out of calibration due to rough handling or impact
(dropping). The lifetime of probe, probe seals and eartips is dependent upon conditions of use.
These parts are only guaranteed against faulty materials or manufacture.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
We advise you against attempting to rectify any faults by yourself or commissioning non-experts to
do so. Equipment is not user repairable. Repairs must be performed by an authorized service
representative only.
WARNING
No modifications of the equipment are allowed by anyone other than a qualified GSI
representative. Modification of the equipment could be hazardous. If this equipment
is modified, appropriate inspection and testing must be conducted to ensure
continued safe use of the equipment.
In order to ensure that your instrument works properly, the GSI GSI 39 should be checked and
calibrated at least once per year. This check must be carried out by your dealer or authorized GSI
service facility.
When returning the instrument for repairs or calibration it is essential to send the acoustic
transducers with the device. Send the device to an authorized service center only. Please include a
detailed description of faults. In order to prevent damage in transit, please use the original packing
if possible when returning the instrument.
