Page 62 of 112
Reflex Display
Reflex test results can be displayed and printed in three different formats:
REFLEX DB HL PLUS CURVE
The default setting for this grouping is
Reflex dB HL plus curve
. All reflex test results will appear on
the display and printout with the following information:
a.
I
(Ipsilateral) or
C
(Contralateral) if available and selected
b.
Frequency
: 500, 1000, 2000, or 4000 Hz
c.
Intensity
level where response was detected
d.
Tracing of actual response curve.
Display format for TYMP/REFLEX Test
(Reflex test results with dB HL value and tracing)
REFLEX DB HL ONLY
If
Reflex dB HL only
is selected, the stimulus frequency, stimulus routing, and the dB HL level for the
reflex will appear on the display and printout.
Display format for TYMP/REFLEX Test
(Reflex test results given in dB HL)
