Grason-Stadler gsi 39, User Manual

Page: 59 / 112

Page 59 of 112
PROGRAM MODE
Program Mode
To enter the program mode, press the PROG ram button located on the front panel. There are two
screens for the Program mode. To move to the second page, press the Increase Frequency button
or turn the Attenuator knob until the cursor is next to the arrow on the bottom right column.
Press to enter Page 2.
PROGRAM MODE MENU ITEMS
The following screen appears the first time you program mode is entered.
PROGRAM MENU PAGE 1 PROGRAM MENU PAGE 2
PROBE HZ... AUD RANGE NORMAL DATA XFER CONFIG... INTERNAL PRINTER
TYMP OPTIONS... AUD RANGE NARROW POWER UP SETTINGS EXTERNAL PRINTER
REFLEX DISPLAY... PRINT – AUDIOGRAM PRN HEADER GSI... RESET TO DEFAULTS
226 HZ REFLEX... PRINT - AUD TABLE PRN HEADER OFF
1 kHZ REFLEX... DEF XDUCER TDH 39 PRN HEADER CUSTOM
AUTO HL SETUP DEF XDUCER INSERT
LANGUAGE
Basic button functions for moving through the Program menu
&
(Cursor)
(Attenuator Knob)
Moves the cursor sequentially through the list of options on the
screen.
Toggles the option on or off. An asterisk (*) appears to the left of
the item to denote the item has been selected. Pressing
again
removes the asterisk, which deselects the item.
(Page)
Use this button to move to the submenu or next page of a menu.
Save The word Save should appear on the lower right corner of the LCD
after the
button has been selected.
Indicates there is a submenu. Select to enter the submenu.