- 38 -
2. Rise the Media Set Lever of the CE7000-40, and then press the “2” button on the control panel
of the CE7000-40.
3. Set the Cutter Plunger to the back side (for Half Cutting) of the Tool holder on the CE7000-40.
Back side：
for Half Cutting
Cutter Plunger
NOTICE
For the how to set the Cutter Plunger to the Tool Holder on the CE7000-40,
please refer to the Userʼs manual of the CE7000-40.
For the how to adjust the blade length of Cutter Plunger, please refer to Userʼs manual
of the CE7000-40.
When performing the calibration of the F-Mark2, set the Cutter Plunger to the back
side position (for Half Cutting) of the Tool Holder on the CE7000-40.
