GRAPHTEC CE7000-130, Service Manual

Page: 50 / 278

CE7000-UM-251-9370 4-4
4 OPERATIONS
Contents of Operation from Menu Screen
In [Simple mode] on the ADVANCE (ADV.) menu, switch between Simple mode and Normal mode.
In Normal mode, you will be able to change more detailed settings.
Simple mode and Normal mode are independent from one another. The settings of the mode you’re currently
in will take precedence.
Simple mode
MENU screen
(Simple mode)
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key is as
following:
[1] (MEDIA) ........... Set the setting of the condition for the media.
[2] (I/F) .................. Set the settings of the condition for the interfacing with the computer.
[3] (ADV.) .............. Set the conditions for the basic operation of the cutting plotter, such as display language
and unit of length.
[PAUSE/MENU] .... MENU screen will be closed and return to default screen.
[SLOW] ................. Displays the position key screen. When media is set, the tool point can be moved.
Normal mode
MENU screen
(Normal mode)
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key is as
following:
[1] (TOOL) ............ Set the setting for the operation of the tool.
[2] (ARMS) ............ Perform settings and operations related to alignment of tool and media, such as automatic
registration mark scanning by ARMS.
[3] (AREA) ............ Set the settings for area, scale, rotation, reverse, etc., of the cutting.
[4] (MEDIA) .......... Set the setting of the condition for the media.
[
p
] (I/F) ................ Set the settings of the condition for the interfacing with the computer.
[
q
] (ADV) ............. Set the conditions for the basic operation of the cutting plotter, such as display language,
unit of the measurements and sensor.
[
t
] (TEST) ............ Does the operation necessary for maintenance, such as self diagnostic test or printout of
the condition settings list.
[
u
] (LINK) ............. Performs operations necessary for output such as data link.
[PAUSE/MENU] .... It will close the MENU screen and return to default screen.
[SLOW] ................. Displays the position key screen. When media is set, the tool point can be moved