Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Page 245 of 305
Feature Code Digits Timeout
Default Setting: 1000.
Configure the maximum interval (in milliseconds) between the
digits input to activate the feature code.
Call Park
Default Extension: 700.
During an active call, initiate blind transfer and then enter this
code to park the call.
Parked Lots
Default Extension: 701-720.
These are the extensions where the calls will be parked, i.e.,
parking lots that the parked calls can be retrieved.
Use Parklot as Extension
If checked, the parking lot number can be used as extension.
The user can transfer the call to the parking lot number to park
the call. Please note this parking lot number range might
conflict with extension range.
Parking Timeout (s)
Default setting: 300.
This is the timeout allowed for a call to be parked. After the
timeout, if the call is not picked up, the extension who parks the
call will be called back.
Feature Codes
Voicemail Access Code
Default Code: *98.
Enter *98 and follow the voice prompt. Or dial *98 followed by
the extension and # to access the entered extension's
voicemail box.
My Voicemail
Default Code: *97.
Press *97 to access the voicemail box.
Agent Pause
Default Code: *83.
Pause the agent in all call queues.
Agent Unpause
Default Code: *84.
Unpause the agent in all call queues.
Paging Prefix
Default Code: *81.
To page an extension, enter the code followed by the extension
number.
Intercom Prefix
Default Code: *80.
To intercom an extension, enter the code followed by the
extension number.
