Grandstream Networks UCM6102 User Manual Download Page 97

Page: 97 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 96 of 305

The following figure shows a list of discovered phones. The MAC address, IP Address, Extension (if

assigned), Version, Vendor, Model, Connection Status, Create Config, Options (Edit/Delete/Update) are

displayed in the list.

Figure 62: Discovered Devices

GLOBAL CONFIGURATION

GLOBAL POLICY

Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN

with the UCM6100 no matter what the Grandstream device model it is. It is divided into two levels:



Web UI->

PBX->Zero Config->Global Policy



Web UI->

PBX->Zero Config->Global Templates



Global Templates

configuration has higher priority to

Global Policy

configuration.

Global Policy can be accessed in web GUI->

PBX->Zero Config->Global Policy

page. On the top of the

configuration table, users can select category in the "Options" dropdown list to quickly navigate to the

category. The categories are:



Localization

: configure display language, data and time.



Phone Settings

: configure dial plan, call features, NAT, call progress tones and etc.



Contact List

: configure LDAP and XML phonebook download.



Maintenance

: configure upgrading, web access, Telnet/SSH access and syslog.



Network Settings

: configure IP address, QoS and STUN settings.



Customization

: customize LCD screen wallpaper for the supported models.

Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for

this parameter.

Summary of Contents for UCM6102





















































































































































































































































































































Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands

Grandstream Networks UCM6102, User Manual

Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands