Grandstream Networks UCM6102 User Manual Download Page 101

Page: 101 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 100 of 305

is 30.

Sort Results

Specify whether the searching result is sorted or not. The default setting is

No.

Incoming Calls

Configure to enable LDAP number searching when receiving calls. The

default setting is No.

Outgoing Calls

Configure to enable LDAP number searching when making calls. The

default setting is No.

Lookup Display Name

Configures the display name when LDAP looks up the name for incoming

call or outgoing call. It must be a subset of the LDAP Name Attributes.

XML Phonebook

Phonebook XML Server

Select the source of the phonebook XML server.



Disable

Disable phonebook XML downloading.



Manual

Once selected, users need specify downloading protocol HTTP,

HTTPS or TFTP and the server path to download the phonebook

XML file. The server path could be IP address or URL, with up to 256

characters.



Local UCM Server

Once selected, click on the Server Path field to upload the phonebook

XML file. Please note: after uploading the phonebook XML file to the

server, the original file name will be used as the directory name and

the file will be renamed as phonebook.xml under that directory.

Phonebook Download Interval

Configure the phonebook download interval (in Minute). If set to 0,

automatic download will be disabled. Valid range is 5 to 720.

Remove manually-edited

entries on download

If set to "Yes", when XML phonebook is downloaded, the entries added

manually will be automatically removed.

Table 29: Global Policy Parameters: Maintenance

Upgrade and Provision

Firmware Source

Firmware source via ZeroConfig provisionoing could a URL for external

server address, local UCM directory or USB media if plugged in to the

UCM6100.

Select a source to get the firmware file:



URL

If select to use URL to upgrade, complete the configuration for the
following four parameters: “Upgrade Via”, “Server Path”, “File Prefix”
and “File Postfix”.

Summary of Contents for UCM6102





















































































































































































































































































































Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands

Grandstream Networks UCM6102, User Manual

Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands