Grandstream Networks UCM6102 User Manual Download Page 129

Page: 129 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 128 of 305

SIP/IAX Password

Configure the password for the user. A random secure password will be

automatically generated. It is recommended to use this password for

security purpose.

Enable Voicemail

Enable voicemail for the user. The default setting is "Yes".

Voicemail Password

Configure voicemail password (digits only) for the user to access the

voicemail box. A random numeric password is automatically generated. It

is recommended to use the random generated password for security

purpose.

Skip Voicemail Password

Verification

When user dials voicemail code, the password verification IVR is skipped.

If enabled, this would allow one-button voicemail access. By default this

option is disabled.

Disable This Extension

If selected, this extension will be disabled on the UCM6100.

Note:

The disabled extension still exists on the PBX but can’t be used on the

end device.

Enable LDAP

If enabled, this extension will be added to LDAP Phonebook PBX list; if

disabled, this extension will be skipped when creating LDAP Phonebook.

User Settings

First Name

Configure the first name of the user. The first name can contain

characters, letters, digits and _.

Last Name

Configure the last name of the user. The last name can contain

characters, letters, digits and _.

Email Address

Fill in the Email address for the user. Voicemail will be sent to this Email

address.

User Password

Configure the password for user portal access. A random numeric

password is automatically generated. It is recommended to use the

randomly generated password for security purpose.

Language

Select the voice prompt language to be used for this extension. The

default setting is "Default" which is the selected voice prompt language

under web GUI->

PBX

Internal Options

Language

. The dropdown list

shows all the current available voice prompt languages on the UCM6100.

To add more languages in the list, please download voice prompt

package by selecting "Check Prompt List" under web UI->

PBX

Internal

Options

Language

Music On Hold

Select which Music On Hold class to suggest to the extension when

putting the active on hold.

Summary of Contents for UCM6102





















































































































































































































































































































Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands

Grandstream Networks UCM6102, User Manual

Search results

Summary of Contents for UCM6102

Reviews:

Related manuals for UCM6102

Brands by name

Popular brands