Graco Husky 1050e, Operation

Page: 13 / 72

Installation
Mount the Pump
To avoid serious injury or death from toxic fluid or
fumes:
• Never move or lift a pump under pressure. If
dropped, the fluid section may rupture. Always
follow the Pressure Relief Procedure, page 29 ,
before moving or lifting the pump.
NOTICE
The pump is heavy. To prevent damage from
dropping, always use 2 people or a lift to move the
pump. Do not use the manifolds to lift the pump.
Use at least one strap.
1. For all mountings, be sure the pump is secured
with screws through the mounting feet (D) and
through the mounting bracket on the gear box.
See Dimensions, page 56 .
NOTICE
To prevent pump damage, use all eight
fasteners.
2. Make sure the surface is flat and that the pump
doesn’t wobble.
3. For BLDCmodels, securely mount the Graco
Motor Control using the provided mounting tabs.
4. For ease of operation and service, mount the
pump so fluid inlet and fluid outlet ports are easily
accessible.
5. Prolonged exposure to UV radiation will degrade
natural polypropylene components of the pumps.
To prevent potential injury or equipment damage,
do not expose pump or the plastic components
to direct sunlight for prolonged periods.
6. Cart Mounting: Some models can be ordered
mounted on a cart. For all other models, Cart
Mounting Kit 24Y543 is available.
Available Cart-Mounted Systems
System
Pump Configuration Number
24Y388 648190
1050A-E,A05BA1SSCWCOPT
24Y552 648250
1050A-E,A06BA1SSCWCOPT
24Y553 648183 1050A-E,A05BA1SPSPSPPT
24Y554 648243 1050A-E,A06BA1SPSPSPPT
24Y555 648180 1050A-E,A05BA1TPACTP-
24Y556 648240 1050A-E,A06BA1TPACTP-
24Y557 648187 1050A-E,A05BA1BNBNBN-
24Y558 648247 1050A-E,A06BA1BNBNBN-
24Y559 650110 1050P-E,A05BP2PPPTPTSPT
24Y560 650154 1050P-E,A06BP2PPPTPTSPT
24Y561 651908 1050S-E,A05BS1SSPTPTSPT
24Y562 651944 1050S-E,A06BS1SSPTPTSPT
334188P 13
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910