Graco Motor Control Operation (BLDC Models)
Operation Modes
The Graco Motor Control has two operation modes:
Run Mode and Setup Mode.
Run Mode
When in Run Mode, the Graco Motor Control displays
the current flow rate (flow mode) or volume remaining
(batch mode).
To adjust the setpoint, press
. Use
and
to scroll to the desired value. Press
to accept
your entry.
If your system is using External Full Control (menu
G209 is set to 3), the setpoint is externally controlled.
The setpoint may be viewed, but it cannot be
adjusted.
Setup Mode
Press
for 2 seconds to enter Setup Mode. If
a password has been set, enter it to proceed. The
Setup Mode screens timeout (return to the Run
Screen) after 60 seconds without a button press.
Each menu in Setup times out after 30 seconds
unless the user presses
.
NOTE: Not entering a password or entering an
incorrect password will still allow accessing 1xx and
3xx menus.
The Setup Mode is organized into four broad
categories:
• 100s: Maintenance
• 200s: Setup (password protected)
• 300s: Diagnostics (displays system values only;
not operator changeable)
• 400s: Advanced (password protected)
The reference table in this section provides a
description of each Setup Mode menu option.
1. Use
and
to scroll to the desired setup
menu code.
2. Press
to make an entry or selection for that
code. For example, scroll to setup menu code
G210, which is used to set a password. Press
.
Some Setup Mode menus require the user to enter a
number.
1.
Use
and
to set each digit of the
number.
2.
Press
on the last digit to return to the setup
menu code options.
Other Setup Menu options require the user to scroll
through and select the number that corresponds to
the desired selection. The table shows the content
that corresponds to each scrolled number in a menu.
• Use
and
to scroll to the desired number.
• Press
on the selected number. For example,
in menu G206, scroll to the number 2 and press
if you want your system to issue an alarm and
stop the pump if it detects a leak.
34
334188P
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910
