Maintenance
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
Maintenance Schedule
Establish a preventive maintenance schedule
based on the pump’s service history. Scheduled
maintenance is especially important to prevent spills
or leakage due to diaphragm failure.
Tighten Threaded Connections
Before each use, check all hoses for wear or damage
and replace as necessary. Check to be sure all
threaded connections are tight and leak-free. Check
mounting bolts. Check fasteners. Tighten or retorque
as necessary. Although pump use varies, a general
guideline is to retorque fasteners every two months.
See
.
Clean the Graco Motor Control
Keep the heat sink fins clean at all times. Clean them
using compressed air.
NOTE: Do not use conductive cleaning solvents on
the module.
Upgrade Graco Motor Control
Software
Use Software Upgrade token 17H104 and
Programming Cable Kit 24Y788 to update the Graco
Motor Control software. The kits include instructions
and all necessary parts.
334188P
41
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910
