![background image](http://html1.mh-extra.com/html/graco/e-flo-dc-series/e-flo-dc-series_instructions-manual_2251328033.webp)
Figure 28 Setup Screen 4 (In Flow Mode)
Pressure
Pressure
Pressure Mode
Mode
Mode Examples
Examples
Examples
• Runaway
Runaway
Runaway Control:
Control:
Control: The user may choose to set the
maximum flow to Alarm. If the flow rate exceeds
the maximum entered on Setup Screen 3, an Alarm
symbol
will show on screen and the pump will
shut down.
• Detect
Detect
Detect a
a
a Plugged
Plugged
Plugged Filter
Filter
Filter or
or
or Pipe:
Pipe:
Pipe: The user may
choose to set the minimum flow to Deviation. If
the flow rate drops below the minimum entered on
Setup Screen 3, a Deviation symbol
will show
on screen to warn the user that action should be
taken. The pump continues to run.
Flow
Flow
Flow Mode
Mode
Mode Examples
Examples
Examples
• Runaway
Runaway
Runaway Control:
Control:
Control: The user may choose to set
the minimum pressure to Alarm. If a hose bursts,
the pump will not change speed, but the back
pressure will fall. When the pressure falls below
the minimum entered on Setup Screen 2, an Alarm
symbol
will show on screen and the pump will
shut down.
• Protect
Protect
Protect Connected
Connected
Connected Equipment:
Equipment:
Equipment: The user may
choose to set the maximum pressure to Limit to
prevent the connected equipment from excessive
pressure.
• Detect
Detect
Detect a
a
a Plugged
Plugged
Plugged Filter
Filter
Filter or
or
or Pipe:
Pipe:
Pipe: The user may
choose to set the maximum pressure to Deviation.
When the pressure exceeds the maximum entered
on Setup Screen 2, a Deviation symbol
will
show on screen to warn the user that action should
be taken. The pump continues to run.
3A3453H
33