Setup
Setup
Setup Screen
Screen
Screen 19
19
19
Use this screen to set your date format, date, time,
or force a restart of the system when updating the
software (update token inserted into the display).
After the software update is completed successfully,
the token must be removed prior to selecting the
Acknowledge key or power cycling the display. If an
update was concluded and the token is not removed,
pressing the Acknowledge key restarts the update
process.
NOTE:
NOTE:
NOTE: Refer to
for instructions on software
updating. Software update is disruptive to all pumps
connected to the display. All pumps attached to
the display must not be pumping material when the
software update is initiated.
Figure 59 Setup Screen 19
Setup
Setup
Setup Screen
Screen
Screen 19
19
19 Key
Key
Key
Select your preferred date format from
the menu.
• MM/DD/YY
• DD/MM/YY (default)
• YY/MM/DD
Set the correct date.
Set the correct time.
Perform a soft restart of the system.
Setup
Setup
Setup Screen
Screen
Screen 20
20
20
Use this screen to enter a password that will be
required to access the Setup screens. This screen
also displays the software version.
Figure 60 Setup Screen 20
Setup
Setup
Setup Screen
Screen
Screen 20
20
20 Key
Key
Key
When the top box of the screen is
checked, the password is active. To
temporarily disable the password,
uncheck the box. The password field will
be grayed-out.
Enter the desired 4-digit password.
Check the box to lock out the profile field
in the Run screens.
Figure 61 Set the Password
Figure 62 Disable the Password
Figure 63 Lock the Profile
3A3453H
43
