Setup
Setup
Setup Screen
Screen
Screen 8
8
8
Use this screen to set up the pressure for transducer
1. Selecting a transducer and checking the pressure
control checkbox activates closed loop pressure
control.
Figure 37 Setup Screen 8
Setup
Setup
Setup Screen
Screen
Screen 8
8
8
Select from the dropdown options to
enable the transducer.
Enables the pump to use the transducer
to control to a pressure setpoint
(psi/bar/mpa, rather than %force)
Enter the calibration scale factor from the
transducer label.
Enter the calibration offset value from the
transducer label.
Displays the current transducer reading.
Figure 38 Select Pressure Transducer
Figure 39 Closed Loop Pressure Enable
Figure 40 Enter Calibration Scale Factor
Figure 41 Enter Calibration Offset Value
36
3A3453H