![background image](http://html1.mh-extra.com/html/graco/dyna-star-3a6941j/dyna-star-3a6941j_instructions-manual_2253485038.webp)
Maintenance
38
3A6941J
35. Connect the refill pump to the fill coupler (F
. 75).
36. Run the refill pump until grease comes out of the
bottom of the tube-in-tube (F
37. Place the follower plate (42) into the tank.
NOTE: The follower plate for the 60 lb. tank has lift rings
attached.
Note: Best practice for thinner fluid is draining the fluid
before placing the follower plate back into the tank (41).
38. Put the cover (54), with pump gasket (49), back
onto the tank (41).
F
IG
. 75
F
IG
. 76
Fill Coupler
Refill Pump
1
F
IG
. 77
F
IG
. 78
41
42
41
49
54
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...