Setup
3A6941J
15
Fill Pumps with an Auto-Fill Shut Off (AFSO)
Note: The remote filling station pump stalls (dead-heads) when the tank is full. If the pump does not stall
(dead-head) there is a leak in the system.
Note: The fill pump pressure can be as high as 2000 psi, depending upon the lengths and diameters of Refilling line
(GG) and Supply hose (JJ). Graco recommends using a 36:1 ratio, or higher, air operated fill pump.
Key:
AA Remote fill station pump*
BB Remote fill station tank*
CC Filter*
DD Pressure relief line*
EE Fill valve* [Graco Part No. 77X542)
FF Fill valve pressure relief knob* [Part of Fill Valve 77X542]
GG Refilling line*
HH Instruction label* [Included with Fill Valve 77X542]
JJ Supply hose*
K Tank
V Auto-Fill Shut Off
V1 Auto-Fill Shut Off valve pin
Y Follower plate
*User supplied
NOTICE
Never allow the pump to run dry of the fluid being
pumped to avoid pump damage.
NOTICE
If the refilling pump runs dry it pumps air into the
pump and may cause damage. Always make sure
that there is enough lubricant in the refilling pump
station.
F
IG
. 12
AA
BB
CC
GG
HH
EE
FF
DD
JJ
V
K
Y
V1
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...
