Troubleshooting
40
3A6941J
Troubleshooting
, page 6, before
checking or repairing the pump.
2. Check all possible problems and causes before
disassembling the pump.
Problem
Cause
Solution
Pump is not powering ON.
The red LED on the motor is not ON.
Wiring is incorrect
Polarity is wrong
Loose wire(s)
Check and verify that the wire
connections are tight.
Check and correct polarity.
Fuse is:
Wrong amperage
Not in place or missing
Faulty
Check the fuse rating and replace
with new or correct amperage fuse.
The lubrication controller is in OFF
mode.
Set the lubrication controller to the
correct lube cycle.
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...
