![background image](http://html1.mh-extra.com/html/graco/dyna-star-3a6941j/dyna-star-3a6941j_instructions-manual_2253485025.webp)
Maintenance
3A6941J
25
7. Remove the cover (54).
8. Remove the follower plate (42) and set aside.
NOTE: The follower plate for the 60 lb. tank has lift rings
attached.
Note: The follower plate may sink into thinner fluids.
9. Remove the pressure relief valve cartridge (5) (F
31).
10. Remove the two bolts (6) and two nuts (not shown)
from the protective cover (8) (F
11. Remove the protective cover (8).
12. Loosen the retaining nut (9) with a 5/8 in. open
wrench (F
. 33).
F
IG
. 29
F
IG
. 30
54
42
F
IG
. 31
F
IG
. 32
5
8
6
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...