Maintenance
3A6941J
35
25. Replace the o-ring (11) and grease lightly (F
26. Slide the tube-in-tube (10) over the assembly and
up to the pump housing. Tighten the flange (torque
40 ft-lb/54.2 N•m) (F
. 66).
27. Fit the pump assembly into the gear head (4). The
retaining nut (9) can be loosened to increase the
gap. Line up the pump rod (27) with the cut out and
slide into place (F
. 67).
Note: Leave the retaining nut loose (9).
28. Place two bolts (6) into the pump assembly to hold
the gear head and pump assembly in place and
tighten slightly the two nuts (7) (F
F
IG
. 65
F
IG
. 66
4
10
11
9
4
9
Flange
F
IG
. 67
F
IG
. 68
4
27
9
Pump
Assembly
6
7
Summary of Contents for Dyna-Star 3A6941J
Page 11: ...Installation 3A6941J 11 Typical Wiring Single Line Parallel Systems FIG 7...
Page 30: ...Maintenance 30 3A6941J 35 Remove the check valve and o ring 37 FIG 49 FIG 49 37...
Page 44: ...Parts 44 3A6941J 43 42 41 58 59 52 55 56 57 54 47 48 49 50 51 53...
Page 51: ...Mounting Dimensions Stand Alone Pump 3A6941J 51 Mounting Dimensions Stand Alone Pump...