![background image](http://html1.mh-extra.com/html/graco/25r128/25r128_setup-operation-repair_2251511021.webp)
HMI Display Operation and Identification
3A7526B
21
•
Bead mode with custom setting
In Bead mode with custom setting, ‘Rate CMD’ will be
shown as voltage value and target flow rate will be
shown. The flow rate will change based on rate
command.
•
Sequence mode
In Sequence mode, the step number, remaining repeat
times, target flow rate and volume will be shown in
different screens based on different step types. The
operator can edit the step by using the touch screen
prior to or following the current job. Once dispensing has
begun, the ‘Control mode’ display will show the current
step, including pre-charge, shot, bead, reload and
depressurization.
Summary of Contents for 25R128
Page 77: ...Parts 3A7526B 77...