HMI Display Operation and Identification
22
3A7526B
Automatic Screen 2
On the Automatic Screen 2, press ‘F1’ or select the
button to display the Automatic Screen 1. Press ‘F4’ or
select the
button to display the Automatic Screen 3.
The content and functions of this screen are as follows:
Sensors status
To show the 3 slider position sensors.
Emergency stop status
•
Red circle: E-stop button is pushed in.
•
Green circle: E-stop button is released.
Servo motor signals
•
Servo ON: This signal will be shown as green after
system start.
•
Servo ready: Motor can be used or is working
without problem.
•
Servo alarm: Something is wrong with the motor.
Operator should push the reset button or send a
remote reset signal. If reset does not work, the
PR-X control box needs to be restarted.
Supply cartridge empty sensor
When the PR-X system is cartridge feed version, this
area will be displayed.
Dispense valve and inlet valves status
If the system is a cartridge version, because the Inlet
Valve (AM) is used for reloading, the on/off sensor
status will be displayed.
F
IG
. 10 Automatic Screen 2
Cartridge Version
Supply Pump Version
Summary of Contents for 25R128
Page 77: ...Parts 3A7526B 77...
